Tesla Powerwall 3 Rebate Now Available - Combine with Federal Subsidy Today
Posted 1 Feb
As Australia continues its electrical and renewable development, more homes and businesses look to install new and shiny electrical systems to futureproof their properties. When getting quotes for solar and electrical systems, you'll most likely get asked 'is your property single or three phase', but what does single and three phase actually mean, and what's the difference?
To understand what single-phase and three-phase means, let's understand what a 'phase' actually is. Tip: the symbol for an electrical phase is 'Φ'.
An electrical phase is essentially a method of delivering power to your property, similar to how a water pipe delivers water. Each phase acts as stream of electricity, and can be upgraded when more power is required.
Australia's AC power supply comes in waves that rise and fall 50 times a second (50Hz), and each of those waves are called a phase.
Using traffic as an example, let's say one lane is open with low to moderate traffic flowing pretty fluently but starts to struggle when heavy traffic appears. This is when three lanes would be more sufficient to allow for the higher demand.
Courtesy of Connor Lucock on Pexels.
Taking our pipe example, single phase is 1 'pipe', and three-phase is 3 'pipes' for additional capacity.
In Australia, single-phase (1Φ) is the most common throughout homes and businesses, which runs at 230V and runs your everyday appliances like lighting, fridges, and the most important appliance - the coffee machine.
Three-phase (3Φ) is used for properties that require extra power capacity like EV chargers, industrial equipment, and high-consuming appliances in both homes and businesses. 3-phase runs at 400V (230V per phase) and is designed to run power-hungry appliances without going over property's maximum capacity.
If a single-phase home wanted a high-powered three-phase EV charger (22kW), the property would need to upgrade to three-phase power to accommodate it as single-phase couldn't deliver that much power.
The difference between single and three-phase power is that electricity is spread over the three-phases to allow you to run higher-consuming appliances without overloading a single phase.
Yes, 2-phase or 'split-phase' electrical power does exist, however only older electrical systems used a form of 2-phase and is almost fully phased-out (pun intended), with modern home electricity supplied as single-phase. Our 2-Phase is not the same as the 120/240V 'split-phase' as the US uses.
Let's use electric vehicle charging as an example of single-phase and three-phase to help us understand it in the real world.
A Tesla Model 3 electric vehicle has a battery which stores 60kWh of energy. If we charged that car with a single-phase charger which is up to 7kW of power, the EV would take 8.2 hours to charge.
When the house is upgraded to three-phase power, it can deliver up to 22kW of charging to the EV, reducing the charge time to under 3 hours. This upgrade has enabled the supply to triplicate and provide more power.
Appliances that may require three-phase power include workshop tools like lathes, pumps, compressors, industrial air-conditioning and ovens, large electric water heaters, or multiple high-powered appliances all at once.
Most fridges, washing machines, and lighting operate on single-phase.
Not every house or business will need to upgrade to three-phase power, however there are benefits to upgrading your electricity supply which may be worth it depending on requirements and budget.
Upgrading your property to three-phase will allow you to use all your appliances (including heavy consumption) at once without tripping any circuits.
Three-phase is also recommended for high-capacity solar and battery systems.
As there isn't really a fixed price, upgrading to three-phase can cost anything between $4,000 - $5,000 depending on the property and requirements.
Whilst not cheap, upgrading properties to three-phase is more than just adding another connection - elements like switchboard upgrades, trenching, cabling and component upgrades will determine costs which will vary property-to-property.
The advantages of upgrading to three-phase power includes a more
stable and durable form of electricity, the ability to run high-powered appliances without worry, and the capability of installing up
to 30kW of solar.
The disadvantages of upgrading to three-phase power includes upfront costs of upgrading which may not be worth it for some, and can also be more complex for any maintenance.
Most Australian homes will be on single-phase power, with larger homes and businesses likely to be three-phase. Here's how you can identify phases:
1. Check your smart meter and see how many 'L' icons there are, or if it mentions other details about phases.
2. Inspect the 'Main Switch Grid Supply' and see how many switches there are from 1-3.
In these examples, you can see both single and three-phase property meter boxes and what they look like inside. In the first image, the 3 'L' icons labelling each phase 1, 2, and 3 on the smart meter indicates 3-phase. The second, mentions '1-phase' in text under the smart meter's screen, and also only has one main grid supply switch.
Bonus tip: Single-phase smart meters are generally narrower than three-phase smart meters.
Whether your home is single-phase or three-phase has a large part in determining the size and type of solar and battery system you can install. Your phase supply impacts the inverter capacity you're allowed to install which affects your maximum solar size, battery configuration options, and whether you need to submit an application for larger systems.
In NSW, Distributed Network Service Providers (DNSPs) set limits on the amount of solar inverter output allowed per phase. Ausgrid for example allow up to 10kW of inverter capacity per phase without needing to submit an application.
If your solar battery is AC-coupled, then the battery's built-in inverter is counted towards the inverter output total.
Three-phase properties on the other hand offer much more flexibility. 3-phase homes with a hybrid inverter can install up to 30kW of inverter capacity which makes it ideal for larger solar and battery systems.
Understanding the differences between single and three-phase can help you make educated decisions for the long term to ensure you're ready to go, and your property is futureproof.
Overall, both single and three-phase setups have their places throughout Australia, with most homes really only needing what single-phase has to offer, and businesses upgrading accordingly. If your property doesn't have to accommodate high-consuming appliances (especially all-at-once), then you should be fine with single phase and won't need to upgrade.
Explore Elite Power Group's solar and battery installation statistics for 2025, and how we performed over this year of operation in Newcastle and Maitland.
Explore the differences between peak shaving and load shifting and how it can maximise solar & battery, reduce your bills and grid reliance in Australia.
Explore the difference between solar inverter types like grid-tied, hybrid, microinverters, and off-grid inverters for solar and battery systems in Australia.
Explore Australia's first CEC-approved bidirectional and vehicle-to-grid capable electric vehicle, the V2Grid Numbat, a 6.2kW V2G/H charger now ready.
Explore how battery nominal & useable energy capacity is different to power output, and learn about state of charge, depth of discharge, and cycles.
Explore the differences between AC and DC electric vehicle charging in Australia and how it affects the way you charge your EV, and the pros & cons.
Considering a cheap solar system? Learn how low-quality, unreliable inverters and panels can lead to costly repairs, full replacements, and safety issues.
Volts vs amps vs watts explained simply. Learn what current is and how watts are calculated using examples & easy conversions for electricity in Australia.
Battery supply chains are tight across Australia, with shipping delays leaving many installers out of stock and customers waiting longer. What's happening?
Learn how to avoid solar scams in NSW. Spot red flags & dodgy installer tactics and find reputable companies with great warranty & quality installations.
Explore the best solar system sizes & how many panels you need, the best Australian solar brands, and cost estimates for 6.6 & 10kW systems in NSW.
Explore why the delays in vehicle-to-grid and bidirectional chargers are happening, and how V2G faces regulatory and legislative development in Australia.
Over 56,000 solar batteries were sold in Q2, 2025, thanks to the Australian battery subsidy. Explore solar & battery uptake, growth trends, and what's next.
Discover how to choose the right solar battery size for your home. Compare 10kWh, 15kWh, and 20kWh options to maximise savings, and solar in NSW.
Explore what Virtual Power Plants (VPP) are, if joining is worth it, and how NSW solar battery owners can earn rewards, FiTs & rebates in Australia.
Explore what solar hotspots are, how they can affect your panel performance & efficiency, & how bypass diodes can affect your cells & strings in Australia.
Explore the process of installing rooftop solar and battery storage systems in a step-by-step guide of 9 easy steps on how solar is installed in Australia.
Discover the best home EV chargers in Australia. Compare popular electric vehicle home charging stations, costs, and installations for Newcastle NSW.
Learn if your roof is suitable for solar panels and how roof materials like terracotta or tin, orientation, tilt, & shading can affect energy production and install.
Power vs Energy in Australia: Difference Between Watts and Watt-Hours, kW vs kWh, with Diagrams, Calculations, and Home Appliance Examples.
Explore upcoming & available bidirectional V2G-capable chargers in Australia from V2Grid, RedEarth, Sigenergy, Enphase, Tesla, and Fronius EV charging.
Compare the difference between Sungrow's SBH and SBR battery storage vs. BYD Battery-Box and find what battery is better for homes or businesses in NSW.
The NSW Government have announced that the NSW Battery Rebate (PDRS) will be suspended on June 30th, 2025, and will no longer be available.
Avoid the 9.7% NSW electricity bill increase with expert tips on reducing energy costs, optimising solar usage, and finding better energy plans in 2025.
Explore how you can use your EV battery via vehicle-to-load (V2L) as a backup energy source during blackouts to power your home appliances in Australia.
Explore Australia's Federal Government solar battery rebate subsidy like eligibility, approved batteries, requirements, and more about the upcoming incentive.
Partnering with Elite Power Group, Maitland City Council have invested in more electric vehicle chargers in the Maitland area, supporting the uptake of EVs.
Does installing solar & batteries affect home insurance? Explore how solar & energy storage changes home insurance premiums in Australia, NSW in 2025.
Should solar owners get a home battery (ESS) or wait for vehicle-to-home (V2H) technology to use electric vehicle battery power to be available in Australia?
Explore available NSW solar rebates, subsidies, incentives, and financing programs to help you invest in solar power for your Newcastle home in 2025.
Explore the differences between AC and DC coupled solar battery storage and how it affects your solar system and inverters' configuration in Australia.
Explore if fleet or public electric vehicle charging is better for charging workplace and employee EVs for your business in Newcastle & the Hunter, NSW.
With homes, Australian standards, and energy networks being ready for bidirectional charging, why the wait? Let's explore grid, EV, & charger developments.
Discover the differences between Tesla Powerwall 3 and Sungrow SBH battery storage and which one is better suited for homes across Australia, NSW in 2025.
Explore the differences and if hot water solar or solar PV systems are better, along with heat pumps and electric water heaters for home savings in Australia.
Working closely with the Newcastle City Council, we helped the development of Gregson Park Playspace with electrical infrastructure, lighting, and facilities.
A very strong storm passed through the Hunter, leaving over 100,000 homes without power. Here's how you can protect your home's energy with independence.
As 2025 comes to light, homes and businesses in NSW have access to a range of rebates and subsidies that allow for discounted installations of solar and battery solutions.
Completing a commercial solar and electric vehicle charger installation, our Thornton neighbours can take full advantage of renewable electricity and charging.
Elite Power Group installed a 2MW commercial solar installation for National Ceramic Industries Australia, totaling 4000 solar panels in Rutherford.
Explore various ways where homes and businesses can reduce electricity bills and maximise solar generation in Newcastle and the Hunter, NSW for 2025.
Explore whether rooftop or ground mounted solar systems are better for homes, farms, and remote properties needing solar PV power in Australia.
The journey of bidirectional charging in Australia has hit a milestone with the recent approval of the new standard for vehicle-to-grid (V2G) charging for 2025.
Explore how daylight savings and seasonal changes during winter and summer can affect your solar panels performance and solar generation in NSW, Australia.
For cabins, homes, and sheds with limited or no access to grid energy, getting an off grid solar and battery storage system may be worth it in NSW in 2025.
Everyone has seen a solar installation a normal roof like tin or tiled roofs, but have you ever seen a solar installation a roof made of Brass? Well we did one...
With the release of the new Clean Energy Council (CEC) H1 2024 report on solar and battery storage, it gives an idea of the upward path of Australia’s renewable energy adoption.
Amber & ARENA have started trials for Vehicle-to-grid technology in NSW, Australia to help develop standards and framework in V2G and Bidirectional charging.
Explore the differences between Tesla Powerwall 2 vs. Tesla Powerwall 3 solar battery storage specs, pricing, and features in Australia for homes.
Explore solar battery fire risks, hazards, and statistics, and if solar batteries are safe to install for homes in NSW, Australia. (Spoiler alert.. they are!)
Investing in your solar system has many opportunities, but should you replace your panels, upgrade with more solar, or add battery storage to your home?
Though bidirectional charging isn't available, vehicle-to-grid is already turning heads in Australia with its potential to change energy consumption and distribution.
Explore how Australia's energy is evolving with t like Microgrids, DER's, Virtual Power Plants, & Demand Response, for solar and battery systems.
Learn alternating and direct current, and the differences between AC vs. DC with real-life examples and diagrams of power flow and voltage in Australia.
Renewable News Articles
Not only are we specialists in solar power, but we pride ourselves in being leading installers in battery
storage, as well as EV charging for homes and businesses. For solar and battery systems, we offer both on and off-grid solutions for a
range of applications.
Newcastle's leading solar installers, providing long-lasting residential and commercial rooftop solar systems.
Experts in both residential and commercial electric vehicle charging station installations from 7kW - 360kW+.
Specialists in off-grid solar and battery, helping properties never have to pay another electricity bill again.
With decades of electrical and industry experience, our fully-qualified & licensed electricians are here to help.
Maximise your solar generation with battery storage from reputable brands to accelerate return-on-investment.
Leave a Comment